LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Front Final Drive) >> Front Final Drive Assembly >> Disassembly and Assembly >> Assembly >> Side Shaft Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Side Shaft Assembly

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the drift, install side shaft oil seal.

    Tool number A: KV38100200 ( - ) 

    CAUTION:
    • Do not reuse oil seal.
    • When installing, do not incline oil seal.
    • Apply multi-purpose grease onto oil seal lips, and gear oil onto the circumference of oil seal.
    Fig 1: Identifying Side Shaft Oil Seal
    G05225548Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Install dust sealed.
  3. Support side shaft bearing with the drift, then press side shaft (1) into the side shaft bearing using a press.

    Tool number A: ST30032000 (J-26010-01) 

    Fig 2: Pressing Side Shaft Into Side Shaft Bearing
    G05225549Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Apply multi-purpose grease to O-ring, and install it to extension tube retainer.
CAUTION: Do not reuse O-ring.
scientia non olet · About LEMON Manuals