CONSULT-III Function (RAS/HICAS): Function
CONSULT-III can display each self-diagnostic item using the diagnostic test modes shown following.
SELF DIAGNOSTIC RESULT REFERENCE
| Self Diagnostic Result | Receives self-diagnosis results from the RAS control unit, and indicates DTCs and the number of malfunctions. |
| Data Monitor | Receives input/output signals from the RAS control unit and indicates and stores them to facilitate locating the causes of malfunctions. |
| Active Test | Sends command to the RAS control unit to change output signals and check operation of output system. |
| ECU identification | Displays the part number of the RAS control unit. |