Rear View Camera Operation: Notes

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

When A/T selector lever is reverse position, power is supplied

Through back-up lamp relay terminal 2
To TCM terminal 7.

Then back-up lamp relay is energized,

From back-up lamp relay terminal 5
To rear view camera control unit terminal 4.

Then, rear view camera control unit is sent camera ON signal

Through rear view camera control unit terminal 8
To rear view camera terminal 1.

An image taken by rear view camera is sent

Through rear view camera terminals 3 and 4
To rear view camera control unit terminals 10 and 9.

Then an image is sent

Through rear view camera control unit terminals 12 and 14
To the display terminals 15 and 16.

An image of rear view will be projected on the display.