Terminals and Reference Value for Rear View Camera Control Unit

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

TERMINALS AND REFERENCE VALUE FOR REAR VIEW CAMERA CONTROL UNIT

Terminals		Item	Condition		Reference value
Terminal No.	Wire color	Item	Ignition switch	Operation	Reference value
1	R/W	Battery power supply	OFF	-	Battery voltage
2	LG	Ignition power supply	ACC	-	Battery voltage
3	B	Ground	ON	-	Approx. 0 V
4	OR	Reverse signal input	ON	A/T selector lever R range position	Battery voltage
4	OR	Reverse signal input	ON	A/T selector lever in other than R range position	Approx. 0 V
5	G/Y	CONTROL 1	ON	-	Approx. 0 V
6	PU	DDL	-	-	-
8	R/W	Camera power output	ON	A/T selector lever R range position	Approx. 6 V
9	-	Camera image input (-)	ON	-	Approx. 0 V
10	W	Camera image input (+)	ON	A/T selector lever R range position	Courtesy of NISSAN MOTOR CO., U.S.A.
11	-	Shield ground	-	-	-
12	L	Composite image output	ON	A/T selector lever R range position	Courtesy of NISSAN MOTOR CO., U.S.A.
14	R	Composite image synchronization signal output	ON	A/T selector lever R range position	Courtesy of NISSAN MOTOR CO., U.S.A.