Detail Flow
DETAIL FLOW REFERENCE CHART
| Order | Input | Output | Control unit condition |
|---|---|---|---|
| 1 | Door switch/Ignition switch | - | Driver seat control unit receives the signals of ignition switch signal and front door switch from BCM via CAN communication. |
| 2 | - | Motors (sliding, tilt) | Driver seat control unit operates the sliding motor when the operating conditions are satisfied. Driver seat control unit then requests the operation of the tilt motor to the automatic drive positioner control unit via UART communication. The automatic drive positioner control unit operates the motor for a constant amount. |
| Sensors (sliding, tilt) | - | Sensors monitor the operating positions of seat and steering wheel and then stops the operation of each motor when each part reaches the recorded address. |