Detail Flow
Seat
SEAT REFERENCE CHART
| Order | Input | Output | Control unit condition |
|---|---|---|---|
| 1 | Power seat switch (sliding, lifting, reclining) | - | The power seat switch signal is inputted to the driver seat control unit when the power seat switch is operated. |
| 2 | - | Motors (sliding, lifting, reclining) | The driver seat control unit outputs signals to each motor according to the power seat switch input signal. |
Adjustable pedals
ADJUSTABLE PEDALS REFERENCE CHART
| Order | Input | Output | Control unit condition |
|---|---|---|---|
| 1 | Pedal adjusting switch | - | The pedal adjusting switch signal is input to the automatic drive positioner control unit when the pedal adjusting switch is operated. |
| 2 | - | Motor | The automatic drive positioner control unit actuates the motor according to the operation of the pedal adjusting switch signal from the driver seat control unit. |
| 3 | Sensor (forward, backward) | - | The automatic drive positioner control unit recognizes any operation limit of each actuator via each sensor and will not operate the actuator anymore at that time. |
Tilt steering wheel
TILT STEERING WHEEL REFERENCE CHART
| Order | Input | Output | Control unit condition |
|---|---|---|---|
| 1 | ADP steering switch | - | The ADP steering switch signal is input to the automatic drive positioner control unit when the ADP steering switch is operated. |
| 2 | - | Motor | The automatic drive positioner control unit actuates the tilt motor according to the operation of the ADP steering switch signal. |
| 3 | Sensor (upward, downward) | - | The automatic drive positioner control unit recognizes any operation limit of each actuator via each sensor and will not operate the actuator anymore at that time. |
Door Mirror
DOOR MIRROR REFERENCE CHART
| Order | Input | Output | Control unit condition |
|---|---|---|---|
| 1 | Door mirror remote control switch | - | The door mirror remote control switch signal is inputted to the automatic drive positioner control unit when the door mirror remote control switch is operated. |
| 2 | - | Motors (Door mirror motor) | The automatic drive positioner control unit actuates each motor according to the operation of the door mirror remote control switch. |
NOTE:
The door mirrors can be operated manually when ignition switch is in either ACC or ON position. The ignition switch signal (ACC/ON) is transmitted from BCM to the driver seat control unit via CAN communication and from the driver seat control unit to the automatic drive positioner control unit via UART communication.