Conditions Of Vehicle (Operating Conditions)

Engine start function is ON when setting on CONSULT-III.
Mechanical key is not inserted in key cylinder.

One or more of Intelligent Keys with registered Intelligent Key ID is in the vehicle.

SYMPTOM REFERENCE

Symptom	Diagnosis/service procedure	Procedural Reference
Ignition switch does not turn on with Intelligent Key. [LCD displays "KEY DETECTED"]	1. Check steering lock solenoid.	STEERING LOCK UNIT
	2. Replace Intelligent Key unit.	INTELLIGENT KEY UNIT
Ignition switch does not turn on with Intelligent Key. [LCD does not display "PUSH" with arrow toward key cylinder]	1. Check Intelligent Key unit power supply and ground circuit.	POWER SUPPLY AND GROUND CIRCUIT
	2. Check ignition knob switch.	IGNITION KNOB SWITCH CHECK
	3. Check key switch (BCM input).	KEY SWITCH (BCM INPUT)
	4. Check key switch (Intelligent Key unit input).	KEY SWITCH (INTELLIGENT KEY UNIT INPUT)
	5. Replace Intelligent Key unit.	INTELLIGENT KEY UNIT
Ignition switch does not turn on with Intelligent Key. [LCD displays "NO KEY"]	1a. Check inside key antenna 1 (rear of center console).	INSIDE KEY ANTENNA 1 (REAR OF CENTER CONSOLE)
	1b. Check inside key antenna 2 (luggage compartment).	INSIDE KEY ANTENNA 2 (LUGGAGE COMPARTMENT)
	1c. Check inside key antenna 3 (front of center console).	INSIDE KEY ANTENNA 3 (FRONT OF CENTER CONSOLE)
	1d. Check inside key antenna 4 (overhead console area).	POWER SUPPLY AND GROUND CIRCUIT
	2. Replace Intelligent Key unit.	INTELLIGENT KEY UNIT
Ignition switch does not turn on with mechanical key	1. Check key switch (BCM input).	KEY SWITCH (BCM INPUT)
Ignition switch does not turn on with mechanical key	2. Check key switch (Intelligent Key unit input).	KEY SWITCH (INTELLIGENT KEY UNIT INPUT)
Engine cannot be cranked with transmission in "Park" or in "Neutral" position with brake pedal depressed.	1. Check transmission signal.	DTC P0705 PARK/NEUTRAL POSITION SWITCH
	2. Check stop lamp switch.	STOP LAMP