LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2009 >> QX56 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing >> On-Vehicle Repair >> Intake Valve Timing Control >> Camshaft Position Sensor (PHASE) >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Camshaft Position Sensor (PHASE): Removal

  1. Remove engine room cover using power tool. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove air duct and resonator assembly. Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect camshaft position sensor connector.
  4. Remove camshaft position sensor (2) from Intake valve timing control solenoid valve cover (LH) (1).
    Fig 1: Identifying Camshaft Position Sensor And Intake Valve Timing Control Solenoid Valve Cover (LH)
    G06315985Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals