DTC Confirmation Procedure
CAUTION:
Always drive vehicle at a safe speed.
NOTE:
If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next step.
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON.
- Turn ignition switch OFF and wait at least 10 seconds.
TESTING CONDITION:
Step 4 may be conducted with the drive wheels lifted in the shop or by driving the vehicle. If a road test is expected to be easier, it is unnecessary to lift the vehicle.
- Turn ignition switch ON.
- Press MAIN switch on ICC steering switch.
- Drive the vehicle at more than 40 km/h (25 MPH).
- Press SET/COAST switch.
- Check DTC.
- If DTC is detected, go to "DIAGNOSIS PROCEDURE ".