Detailed Flow
- INTERVIEW FOR MALFUNCTION
Interview the customer about the symptom.
GO TO 2.
- SYMPTOM CHECK
Verify the symptom from the customer's information.
GO TO 3.
- BASIC INSPECTION
Check the operation of each part. Check that no symptoms occur other than those specified by the customer.
GO TO 4.
- SELF-DIAGNOSIS WITH CONSULT-III
Perform the self diagnosis with CONSULT-III. Check that any DTC is detected.
Is any DTC detected?
YES: GO TO 5.
No: GO TO 6.
- TROUBLE DIAGNOSIS BY DTC
Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.
GO TO 7.
- SYMPTOM DIAGNOSIS
Perform the symptom diagnosis. Specify the malfunctioning part.
GO TO 7.
- MALFUNCTIONING PART REPAIR
Repair or replace the malfunctioning part.
GO TO 8.
- REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT-III)
Perform the self diagnosis with CONSULT-III. Verified that no DTCs are detected. Erase all DTCs detected prior to the repair. Verify that DTC is not detected again.
Is any DTC detected?
YES: GO TO 5.
No: GO TO 9.
- REPAIR CHECK (OPERATION CHECK)
Check the operation of each part.
Does it operate normally?
YES: Inspection End.
No: GO TO 3.