Shift Lock Control Unit Inspection Table
Data are reference values.
SHIFT LOCK CONTROL UNIT INSPECTION CHART
| TERMINAL NO. |
WIRE COLOR |
ITEM |
CONDITION |
VOLTAGE (Approx.) |
| 1 |
Y/R |
Power source |
Ignition switch: "ON" |
Battery voltage |
| P |
Ignition switch: "OFF" |
Battery voltage |
| 2 |
L/R |
Detention switch (for key) |
When selector lever is not in "P" position with key inserted. |
Battery voltage |
| Except the above |
0V |
| 3 |
GR |
Detention switch (for shift) |
When selector lever is not in "P" position |
Battery voltage |
| Except the above |
0V |
| 4 |
R/G |
Stop lamp switch |
When brake pedal is depressed |
Battery voltage |
| When brake pedal is released |
0V |
| 5 |
W/R |
Vehicle speed signal |
- |
- |
| 6 |
G/R |
Ignition signal |
Ignition switch: "OFF" |
0V |
| Ignition switch: "ON" |
Battery voltage |
| 7 |
R/W |
Shift lock solenoid |
When brake pedal is depressed with ignition switch "ON". |
0V |
| When brake pedal is depressed. |
Battery voltage |
| 8 |
B |
Ground |
Always |
0V |
| 9 |
R |
Key lock solenoid |
When the selector lever is set to a position other than the "P" position, and the key switch is turned from "ON" to "OFF" |
Battery voltage for approx. 0.1 sec. () |
| Except the above |
0V |
| 10 |
W/G |
Key unlock solenoid |
When ignition switch is not in "ON" position with key inserted. |
Battery voltage for approx. 0.1 sec. () |
| Except the above |
0V |