October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
ICC Brake Hold Relay
- Apply 12V direct current between ICC brake hold relay terminals 1 and 2.
- Check continuity between relay terminals 3 and 4, 6 and 7 under the following conditions.
CONTINUITY REFERENCE CHART
| Condition |
Between terminals |
Continuity |
| 12V direct current supply between terminals 1 and 2 |
3 and 4 |
Should not exist |
| 6 and 7 |
Should exist |
| No current supply |
3 and 4 |
Should exist |
| 6 and 7 |
Should not exist |
- If NG, replace ICC brake hold relay.
Courtesy of NISSAN MOTOR CO., U.S.A.