Diagnosis Procedure

CHECK CONTINUITY COMMUNICATION SIGNAL CIRCUIT

Turn ignition switch OFF.
Disconnect around view monitor control unit connector and door mirror (passenger side) connector.

Check continuity between around view monitor control unit harness connector and door mirror (passenger side) harness connector.

CONTINUITY REFERENCE CHART

Around view monitor control unit		Door mirror (passenger side)		Continuity
Connector	Terminal	Connector	Terminal	Continuity
B46	33	D33	3	Existed

Check continuity between around view monitor control unit harness connector and ground.

CONTINUITY REFERENCE CHART

Around view monitor control unit		Ground	Continuity
Connector	Terminal
B46	33		Not existed

Is inspection result normal?

YES: GO TO 2.

NO: Repair harness or connector.

CHECK COMMUNICATION SIGNAL

Connect around view monitor control unit connector and door mirror (passenger side) connector.
Turn ignition switch ON.

Check signal between around view monitor control unit harness connector and ground.

SIGNAL REFERENCE CHART

(+)		(-)	Reference value
Around view monitor control unit
Connector	Terminal
B46	33	Ground	Courtesy of NISSAN MOTOR CO., U.S.A.

Is inspection result normal?

YES: Replace around view monitor control unit.

NO: Replace side camera RH.