Release Conditions Of Fail-Safe

Fail-safe is released on following conditions and normal mode is restored.

When The Temperature of HDD Is Low Or High

If the ambient temperature becomes out of fail-safe condition range, normal mode is restored.

When HDD Is Malfunctioning

If the malfunction disappears, normal mode is restored.

NOTE:

If fail-safe mode due to HDD malfunction is seen continuously, replace AV control unit.
If fail-safe mode due to HDD malfunction is seen temporarily, check the "Error History" of Confirmation/Adjustment mode. If this is normal, then continue the normal operation, observing the function. (It might be a temporary malfunction of HDD.)