Removal and Installation: Removal

Disconnect the battery cable from the negative terminal.
Remove the cowl top cover (RH). Refer to "EXPLODED VIEW ".
Pull up the IPDM E/R assembly while pressing the pawls (A) on the back of the IPDM E/R cover B (1).

Fig 1: Identifying Pawls On Back Of IPDM E/R Cover B
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove the IPDM E/R cover A (1) while pressing the pawls (A) at the lower end of the IPDM E/R cover A.
Disconnect the harness connector and remove the IPDM E/R (2).

Fig 2: Identifying IPDM E/R Cover A And Pawls
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove the bolts (A) and remove the bracket (1) from the vehicle.

Fig 3: Identifying Bolts And Bracket
Courtesy of NISSAN MOTOR CO., U.S.A.