Diagnosis Procedure
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CAMERA-CONNECTION RECOGNITION SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect AV control unit connector and camera control unit connector.
- Check continuity between AV control unit harness connector and camera control unit harness connector.TERMINALS CONTINUITY SPECIFICATION
AV control unit Camera control unit Continuity Connector Terminal Connector Terminal M84 68 B50 14 Existed
Is inspection result normal?
YES: GO TO 2.
NO: Repair harness or connector.
- CHECK AV CONTROL UNIT VOLTAGE
- Connect AV control unit connector.
- Turn ignition switch ON.
- Check voltage between AV control unit harness connector and ground.TERMINALS VOLTAGE SPECIFICATION
(+) (-) Voltage (Approx.) AV control unit Connector Terminal M84 68 Ground 5.0 V
Is inspection result normal?
YES: Replace camera control unit.
NO: Replace AV control unit.