LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Audio, Visual & Navigation System - Base Audio Without Navigation) >> Base Audio Without Navigation >> Component Diagnosis >> Request Signal Circuit (Sat→Cont) >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CONTINUITY REQUEST SIGNAL CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect satellite radio tuner connector and AV control unit connector.
    3. Check continuity between satellite radio tuner unit harness connector and AV control unit harness connector.
      TERMINALS CONTINUITY SPECIFICATION

      Satellite radio tuner AV control unit Continuity
      Connector Terminal Connector Terminal
      B236 8 M82 28 Existed
    4. Check continuity between satellite radio tuner harness connector and ground.
      TERMINALS CONTINUITY SPECIFICATION

      Satellite radio tuner Ground Continuity
      Connector Terminal
      B236 8 Not existed

    Is the inspection result normal? 

    YES: GO TO  2.

    NO: Repair harness or connector.

  2. CHECK COMMUNICATION SIGNAL 
    1. Connect satellite radio tuner connector and AV control unit connector.
    2. Turn ignition switch ON.
    3. Check signal between satellite radio tuner harness connector and ground.
      TERMINALS REFERENCE

      (+) (-) Condition Reference value
      Satellite radio tuner
      Connector Terminal
      B236 8 Ground When satellite radio mode is selected.
      G05731579Courtesy of NISSAN MOTOR CO., U.S.A.

    Is the inspection result normal? 

    YES: Replace AV control unit.

    NO: Replace satellite radio tuner.