Self-Diagnosis Results
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- The self-diagnosis mode allows the technician to diagnose the connection in the communication line between the AV control unit and each unit, and the internal operation of AV control unit.
- Because the start condition of the diagnosis function is a switch operation, the on board diagnosis function cannot be started up if any malfunction is detected in the communication circuit between AV control unit and multifunction switch.
- Check the applicable display in the following table, and then repair the malfunctioning parts.
SELF-DIAGNOSIS RESULT TABLE
| Diagnosis results | Description | Possible malfunction location/Action to take |
|---|---|---|
| "Self-Diagnosis did not run because of a control unit malfunction" | AV control unit malfunction is detected. | Replace AV control unit. |
|
NOTE:
When a control unit malfunction is detected (red in the unit display), connection malfunctions with other connection units may be displayed.
|
Malfunction is detected in AV control unit power supply or ground circuits. | Check AV control unit power supply and ground circuits. When detecting no malfunction in those components, replace AV control unit. |
| Malfunction is detected in the communication circuits between AV control unit and display unit. | Communication circuits between AV control unit and display unit. | |
When either one of the following items are detected:
|
|
|
| A malfunction is detected in the camera connection recognition circuit between AV control unit and camera control unit. | Camera connection recognition circuit between AV control unit and camera control unit. |