Detailed Flow
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- INTERVIEW AND SYMPTOM CONFIRMATION
Check the malfunction symptoms by performing the following items.
- Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred).
- Check the symptom.
Is the occurred symptom malfunction?
YES: GO TO 2.
NO: INSPECTION END
- DIAGNOSIS WITH CONSULT-III
- Connect CONSULT-III and perform a self-diagnosis for "MULTI AV". Refer to CONSULT-III FUNCTION (MULTI AV)
.NOTE: Skip to step 4 of the diagnosis procedure if "MULTI AV" is not displayed.
- Check if any DTC is displayed in the self-diagnosis results.
Is DTC displayed?
YES: GO TO 3.
NO: GO TO 4.
- Connect CONSULT-III and perform a self-diagnosis for "MULTI AV". Refer to CONSULT-III FUNCTION (MULTI AV)
.
- TROUBLE DIAGNOSIS FOR DTC
- Check the DTC indicated in the self-diagnosis results.
- Perform the relevant diagnosis referring to the DTC Index. Refer to DTC INDEX .
GO TO 5.
- TROUBLE DIAGNOSIS FOR SYMPTOMS
Perform the relevant diagnosis referring to the diagnosis table by symptom. Refer to SYMPTOM TABLE .
GO TO 5.
- ERROR PART REPAIR
- Repair or replace the identified malfunctioning parts.
- Perform a self-diagnosis for "MULTI AV" with CONSULT-III.NOTE: Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC has been indicated in the self-diagnosis results.
- Check that the symptom does not occur.
Does the symptom occur?
YES: GO TO 1.
NO: INSPECTION END