On Board Diagnosis

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

Description

The trouble diagnosis function has a self-diagnosis mode for conducting trouble diagnosis automatically and a confirmation/adjustment mode for operating manually.
The self-diagnosis mode performs diagnoses on AV control unit, connections between system components, AV control unit and GPS antenna and between AV control unit and satellite radio antenna. Then it displays the diagnosis results on display.
The confirmation/adjustment mode allows the technician to check, modify or adjust the vehicle signals and set values, as well as to monitor the system error records and system communication status. The checking, modifying or adjusting generally require human intervention and judgment (the system cannot make a judgment automatically).

On board diagnosis item

MODE DESCRIPTION TABLE

Mode			Description
Self Diagnosis			AV control unit diagnosis Diagnoses the connections across system components, between AV control unit and GPS antenna and between AV control unit and satellite radio antenna.
Confirmation/Adjustment	Display Diagnosis		The following check functions are available: color tone check by color bar display, light and shade check by gray scale display and touch panel calibration response check.
	Vehicle Signals		Diagnosis of signals can be performed for vehicle speed, parking brake, lights, ignition switch, and reverse.
	Speaker Test		The connection of a speaker can be confirmed by test tone.
	Climate Control		Start auto air conditioner system self-diagnosis.
	Navigation	Steering Angle Adjustment	When there is a difference between the actual turning angle and the vehicle mark turning angle, it can be adjusted.
		Speed Calibration	When there is a difference between the current location mark and the actual location, it can be adjusted.
		XM SAT Subscription Status	The XM NavTraffic subscription status can be checked.
	Error History		The system malfunction and the frequency when occurring in the past are displayed. When the malfunctioning item is selected, the time and place that the selected malfunction last occurred are displayed.
	Synchronizer FES clock		-
	Vehicle CAN Diagnosis		The transmitting/receiving of CAN communication can be monitored.
	AV COMM Diagnosis		The communication condition of each unit of Multi AV system can be monitored.
	Hands-free Phone		The received volume adjustment of hands-free phone, microphone speaker check, and erase memory can be performed.
	Camera Cont.	With rear view monitor	The signal connected to camera control unit can be checked and the guiding line position that overlaps rear view camera image can be adjusted.
	Camera Cont.	With around view monitor	It can perform the confirmation of a signal connection to around view monitor control unit, the calibration of each camera, Correct Draw Line of Camera Image, and Fine Tuning of Birds-Eye View. Refer to DIAGNOSIS DESCRIPTION .
	Bluetooth		The passkey and the device name can be checked and changed.
	SAT	Change Channel	Any necessary channels required to receive traffic information from the satellite radio system can be set.
		Change Application ID	Any application IDs required to receive traffic information from the satellite radio system can be set.
		Diag	Not used.
	Delete Unit Connection Log		Erase the connection history of unit and error history.
	Initialize Settings		Initializes AV control unit memory.