LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> EX35 Base, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> On-Vehicle Maintenance >> Transfer Fluid >> Inspection >> Fluid Level
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fluid Level

  1. Remove filler plug (1) and gasket. Then check that fluid is filled up from mounting hole for the filler plug.
    CAUTION: Never start engine while checking fluid level.
  2. Before installing filler plug, set a new gasket. Install filler plug on transfer and tighten to the specified torque. Refer to "EXPLODED VIEW ".
    CAUTION: Never reuse gasket.
    Fig 1: Inspecting Fluid Level
    G05224027Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals