Physical Values

AV CONTROL UNIT CONNECTOR TERMINALS REFERENCE CHART

Terminal (Wire color)		Description		Condition		Reference value (Approx.)
+	-	Signal name	Input/Output	Condition		Reference value (Approx.)
2 (L)	3 (W)	Sound signal front door speaker LH and front tweeter LH	Output	Ignition switch ON	Audio output	Courtesy of NISSAN MOTOR CO., U.S.A.
4 (LG)	5 (SB)	Sound signal rear door speaker LH	Output	Ignition switch ON	Audio output	Courtesy of NISSAN MOTOR CO., U.S.A.
6 (P)	15 (B)	Steering switch signal A	Input	Ignition switch ON	Keep pressing SOURCE switch.	0 V
					Keep pressing ↑ switch.	0.7 V
					Keep pressing ↓ switch.	1.3 V
					Except for above.	3.3 V
7 (V)	Ground	ACC power supply	Input	Ignition switch ACC	-	Battery voltage
9 (R)	Ground	Illumination signal	Input	Ignition switch OFF	Lighting switch is OFF.	0 V
9 (R)	Ground	Illumination signal	Input	Ignition switch OFF	Lighting switch is ON.	12.0 V
11 (BR)	12 (R)	Sound signal front door speaker RH and front tweeter RH	Output	Ignition switch ON	Audio output	Courtesy of NISSAN MOTOR CO., U.S.A.
13 (L)	14 (P)	Sound signal rear door speaker RH	Output	Ignition switch ON	Audio output	Courtesy of NISSAN MOTOR CO., U.S.A.
15 (B)	Ground	Steering switch signal ground	-	Ignition switch ON	-	0 V
16 (L)	15 (B)	Steering switch signal B	Input	Ignition switch ON	Keep pressing VOL DOWN switch.	0 V
					Keep pressing VOL UP switch.	0.7 V
					Except for above.	3.3 V
17 (B)	Ground	Ground	-	Ignition switch ON	-	0 V
19 (Y)	Ground	Battery power supply	Input	Ignition switch OFF	-	Battery voltage
20 (B)	Ground	Ground	-	Ignition switch ON	-	0 V
22 (B)	21 (W)	Satellite radio sound signal LH	Input	Ignition switch ON	When satellite radio mode is selected	Courtesy of NISSAN MOTOR CO., U.S.A.
24 (G)	23 (R)	Satellite radio sound signal RH	Input	Ignition switch ON	When satellite radio mode is selected	Courtesy of NISSAN MOTOR CO., U.S.A.
25	-	Shield	-	-	-	-
26	-	Shield	-	-	-	-
28 (W)	Ground	Request signal (SAT→CONT)	Input	Ignition switch ON	When satellite radio mode is selected	Courtesy of NISSAN MOTOR CO., U.S.A.
29 (B)	Ground	Communication signal (SAT→CONT)	Input	Ignition switch ON	When satellite radio mode is selected	Courtesy of NISSAN MOTOR CO., U.S.A.
30 (R)	Ground	Communication signal (CONT→SAT)	Output	Ignition switch ON	When satellite radio mode is selected	Courtesy of NISSAN MOTOR CO., U.S.A.
33	-	FM sub	Input	-	-	-
34	-	AM-FM main	Input	-	-	-
35	Ground	Antenna amp. ON signal	Output	Ignition switch ACC	-	12.0 V
36 (SB)	Ground	Composite image signal	Output	Ignition switch ON	At rear view camera or AUX image display	Courtesy of NISSAN MOTOR CO., U.S.A.
37 (V)	Ground	Composite image ground	-	Ignition switch ON	-	0 V
38 (P)	Ground	RGB signal (B: blue)	Output	Ignition switch ON	Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen.	Courtesy of NISSAN MOTOR CO., U.S.A.
39 (L)	Ground	RGB signal (G: green)	Output	Ignition switch ON	Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen.	Courtesy of NISSAN MOTOR CO., U.S.A.
40 (G)	Ground	RGB signal (R: red)	Output	Ignition switch ON	Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen.	Courtesy of NISSAN MOTOR CO., U.S.A.
41 (W)	Ground	RGB synchronizing signal	Output	Ignition switch ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
42	-	Shield	-	-	-	-
43 (B)	Ground	RGB area (YS) signal	Output	Ignition switch ON	At RGB image display	5.0 V
43 (B)	Ground	RGB area (YS) signal	Output	Ignition switch ON	At AUX image display	Courtesy of NISSAN MOTOR CO., U.S.A.
44 (BR)	Ground	Communication signal (DISP→CONT)	Input	Ignition switch ON	When adjusting display brightness.	Courtesy of NISSAN MOTOR CO., U.S.A.
45 (R)	Ground	Horizontal synchronizing (HP) signal	Input	Ignition switch ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
46 (LG)	Ground	Signal ground	-	Ignition switch ON	-	0 V
47 (O)	Ground	Signal VCC	Output	Ignition switch ACC	-	9.0 V
49	-	Shield	-	-	-	-
50	-	Shield	-	-	-	-
55	-	Shield	-	-	-	-
56 (Y)	Ground	Communication signal (CONT→DISP)	Output	Ignition switch ON	When adjusting display brightness.	Courtesy of NISSAN MOTOR CO., U.S.A.
57 (G)	Ground	Vertical synchronizing (VP) signal	Input	Ignition switch ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
58 (BR)	Ground	Inverter ground	-	Ignition switch ON	-	0 V
59 (Y)	Ground	Inverter VCC	Output	Ignition switch ACC	-	9.0 V
64	-	Shield	-	-	-	-
65 (W)	Ground	Camera image signal	Input	Ignition switch ON	At rear view camera image display	Courtesy of NISSAN MOTOR CO., U.S.A.
66 (G)	Ground	AUX image signal	Input	Ignition switch ON	When AUX mode is selected	Courtesy of NISSAN MOTOR CO., U.S.A.
68 (W)	Ground	Camera-connection recognition signal	-	Ignition switch ON	Connected to camera control unit connector	0 V
68 (W)	Ground	Camera-connection recognition signal	-	Ignition switch ON	Not connected to camera control unit connector	5.0 V
73	-	Shield	-	-	-	-
74 (R)	Ground	AUX image signal ground	-	Ignition switch ON	-	0 V
85 (B)	Ground	Ground	-	Ignition switch ON	-	0 V
86 (L)	-	CAN-H	Input/Output	-	-	-
87 (P)	-	CAN-L	Input/Output	-	-	-
88 (LG)	-	AV communication signal (H)	Input/Output	-	-	-
89 (V)	-	AV communication signal (L)	Input/Output	-	-	-
90 (G)	-	AV communication signal (H)	Input/Output	-	-	-
91 (R)	-	AV communication signal (L)	Input/Output	-	-	-
95 (B)	Ground	AUX sound signal RH	Input	Ignition switch ON	When AUX mode is selected	Courtesy of NISSAN MOTOR CO., U.S.A.
96 (R)	Ground	AUX sound signal LH	Input	Ignition switch ON	When AUX mode is selected	Courtesy of NISSAN MOTOR CO., U.S.A.
97 (W)	Ground	AUX sound signal ground	-	Ignition switch ON	-	0 V
101 (BR)	Ground	SW ground	-	Ignition switch ON	-	0 V
103 (SB)	Ground	Disk eject signal	Input	-	Pressing the eject switch	0 V
103 (SB)	Ground	Disk eject signal	Input	-	Except for above	3.3 V
104 (G)	Ground	Ignition signal	Input	Ignition switch ON	-	Battery voltage
105 (O)	Ground	Reverse signal	Input	Ignition switch ON	Shift position in R position	12.0 V
105 (O)	Ground	Reverse signal	Input	Ignition switch ON	Other than shift position in R position	0 V
106 (V)	Ground	Parking brake signal	Input	Ignition switch ON	Parking brake ON	0 V
106 (V)	Ground	Parking brake signal	Input	Ignition switch ON	Parking brake OFF	Courtesy of NISSAN MOTOR CO., U.S.A.
107 (R)	Ground	Vehicle speed signal (8-pulse)	Input	Ignition switch ON	When vehicle speed is approx. 40 km/h (25MPH)	NOTE: The maximum voltage varies depending (destination unit) Courtesy of NISSAN MOTOR CO., U.S.A.