WITH AROUND VIEW MONITOR : Diagnosis Procedure
- CHECK CONTINUITY CAMERA IMAGE SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect around view monitor control unit connector and display unit connector.
- Check continuity between around view monitor control unit harness connector and display unit harness connector.CONTINUITY REFERENCE CHART
Around view monitor control unit display unit Continuity Connector Terminal Connector Terminal B46 27 M75 12 Existed - Check continuity between around view monitor control unit harness connector and ground.CONTINUITY REFERENCE CHART
Around view monitor control unit Ground Continuity Connector Terminal B46 27 Not existed Is inspection result normal?
YES: GO TO 2.
NO: Repair harness or connector.
- CHECK CAMERA IMAGE SIGNAL
- Connect around view monitor control unit connector and display unit connector.
- Turn ignition switch ON.
- Check signal between around view monitor control unit harness connector and ground.SIGNAL REFERENCE CHART
(+) (-) Condition Reference value Around view monitor control unit Connector Terminal B46 27 Ground At camera image display Other than camera image display Is inspection result normal?
YES: Replace display unit.
NO: Replace around view monitor control unit.