LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> EX35 Base, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Audio, Visual, Navigation System >> Base Audio Without Navigation >> Component Diagnosis >> RGB Synchronizing Signal Circuit >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

  1. CHECK CONTINUITY RGB SYNCHRONIZING SIGNAL CIRCUIT
    1. Turn ignition switch OFF.
    2. Disconnect display unit connector and AV control unit connector.
    3. Check continuity between display unit harness connector and AV control unit harness connector.
      CONTINUITY REFERENCE CHART

      Display unit AV control unit Continuity
      Connector Terminal Connector Terminal
      M71 19 M83 41 Existed
    4. Check continuity between display unit harness connector and ground.
      CONTINUITY REFERENCE CHART

      Display unit Ground Continuity
      Connector Terminal
      M71 19 Not existed

      Is the inspection result normal? 

      YES: GO TO 2.

      NO: Repair harness or connector.

  2. CHECK RGB SYNCHRONIZING SIGNAL
    1. Connect display unit connector and AV control unit connector.
    2. Turn ignition switch ON.
    3. Check signal between display unit harness connector and ground.
      SIGNAL REFERENCE CHART

      (+) (-) Reference value
      Display unit
      Connector Terminal
      M71 19 Ground
      G04879209Courtesy of NISSAN MOTOR CO., U.S.A.

      Is the inspection result normal? 

      YES: Replace display unit.

      NO: Replace AV control unit.

scientia non olet · About LEMON Manuals