Detail Flow
CONTROL UNIT CONDITION CHART
| Order | Input | Output | Control unit condition |
|---|---|---|---|
| 1 | Door switch/Ignition switch | - | Driver seat control unit receives the signals of [ignition switch signal] and [driver side door switch] from BCM via CAN communication. |
| 2 | - | Motors (Sliding, tilt, telescopic) | Driver side control unit operates the sliding motor when the operating conditions are satisfied and requests the operations of tilt motor and telescopic motor to automatic drive positioner control unit via UART communication. The automatic drive positioner operates each motor. |
| Sensors (Sliding, tilt, telescopic) | - | Each sensor monitors the operating positions of seat and steering, and then stops the operation of each motor when each part reaches the recorded address. |