Diagnosis Procedure
- CHECK CONTINUITY COMMUNICATION SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect around view monitor control unit connector and front camera connector.
- Check continuity between around view monitor control unit harness connector and front camera harness connector.CONTINUITY REFERENCE CHART
Around view monitor control unit Front camera Continuity Connector Terminal Connector Terminal B45 45 E73 6 Existed - Check continuity between around view monitor control unit harness connector and ground.CONTINUITY REFERENCE CHART
Around view monitor control unit Ground Continuity Connector Terminal B45 45 Not existed Is inspection result normal?
YES: GO TO 2.
NO: Repair harness or connector.
- CHECK COMMUNICATION SIGNAL
- Connect around view monitor control unit connector and front camera connector.
- Turn ignition switch ON.
- Check signal between around view monitor control unit harness connector and ground.SIGNAL REFERENCE CHART
(+) (-) Reference value Around view monitor control unit Connector Terminal B45 45 Ground Is inspection result normal?
YES: Replace around view monitor control unit.
NO: Replace front camera.