LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> EX35 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio, Visual, Navigation System >> BOSE Audio With Navigation >> Component Diagnosis >> Side Camera RH Image Signal Circuit >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

  1. CHECK CONTINUITY SIDE CAMERA RH POWER SUPPLY AND GROUND CIRCUIT
    1. Turn ignition switch OFF.
    2. Disconnect control unit connector and door mirror (passenger side) connector.
    3. Check continuity between around view monitor control unit harness connector and door mirror (passenger side) harness connector.
      CONTINUITY REFERENCE CHART

      Around view monitor control unit Door mirror (passenger side) Continuity
      Connector Terminals Connector Terminals
      B46 32 D33 18 Existed
      34 6
    4. Check continuity between around view monitor control unit harness connector and ground.
      CONTINUITY REFERENCE CHART

      Around view monitor control unit Ground Continuity
      Connector Terminal
      B46 34 Not existed

      Is inspection result normal? 

      YES: GO TO 2.

      NO: Repair harness or connector.

  2. CHECK VOLTAGE SIDE CAMERA RH POWER SUPPLY
    1. Connect around view monitor control unit connector and door mirror (passenger side) connector.
    2. Turn ignition switch ON.
    3. Check voltage between around view monitor control unit harness connector and ground.
      VOLTAGE REFERENCE CHART

      (+) (-) Condition Voltage (Approx.)
      Around view monitor control unit
      Connector Terminal
      B46 34 Ground "CAMERA" switch is ON or shift position is "R". 6.0 V

      Is inspection result normal? 

      YES: GO TO 3.

      NO: Replace around view monitor control unit.

  3. CHECK CONTINUITY SIDE CAMERA RH IMAGE SIGNAL CIRCUIT
    1. Turn ignition switch OFF.
    2. Disconnect around view monitor control unit connector and door mirror (passenger side) connector.
    3. Check continuity between around view monitor control unit harness connector and door mirror (passenger side) harness connector.
      CONTINUITY REFERENCE CHART

      Around view monitor control unit Door mirror (passenger side) Continuity
      Connector Terminals Connector Terminals
      B46 29 D33 5 Existed
      30 17
    4. Check continuity between around view monitor control unit harness connector and ground.
      CONTINUITY REFERENCE CHART

      around view monitor control unit Ground Continuity
      Connector Terminals
      B46 29, 30 Not existed

      Is inspection result normal? 

      YES: GO TO 4.

      NO: Repair harness or connector.

  4. CHECK SIDE CAMERA RH IMAGE SIGNAL
    1. Connect around view monitor control unit connector and door mirror (passenger side) connector.
    2. Turn ignition switch ON.
    3. Check signal between around view monitor control unit harness connector.
      SIGNAL REFERENCE CHART

      (+) (-) Condition Reference value
      Around view monitor control unit Around view monitor control unit
      Connector Terminal Connector Terminal
      B46 29 B46 30 "CAMERA" switch is ON or shift position is "R".
      G05732118Courtesy of NISSAN MOTOR CO., U.S.A.

      Is inspection result normal? 

      YES: Replace around view monitor control unit.

      NO: Replace side camera RH.

scientia non olet · About LEMON Manuals