Physical Values

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

PHYSICAL VALUES

Terminal No. (Wire color)		Description		Condition	Value (Approx.)
+	-	Signal name	Input/Output	Condition	Value (Approx.)
1 (LG)	Ground	Power steering solenoid valve voltage	Output	Vehicle speed: 0 km/h (0 MPH) (Engine is running)	4.4 - 6.6 V
1 (LG)	Ground	Power steering solenoid valve voltage	Output	Vehicle speed: 100 km/h (62 MPH)	2.4 - 3.6 V
3 (G)	Ground	Ignition switch power supply	Input	Ignition switch: ON	Battery voltage
3 (G)	Ground	Ignition switch power supply	Input	Ignition switch: OFF	0 V
5 (B)	Ground	Power steering solenoid valve ground	-	Always	0 V
6 (B)	Ground	Ground	-	Always	0 V
8 (L)	Ground	Vehicle speed signal	Input	Vehicle speed: 40 km/h (25 MPH) CAUTION: Check air pressure of tire under standard condition.	Courtesy of NISSAN MOTOR CO., U.S.A.
10 (R)	Ground	Engine speed signal	Input	Engine is running Warm-up condition Idle speed	Courtesy of NISSAN MOTOR CO., U.S.A.
10 (R)	Ground	Engine speed signal	Input	Engine is running Warm-up condition Engine speed: Approx. 2,000 rpm	Courtesy of NISSAN MOTOR CO., U.S.A.

CAUTION: When using circuit tester or oscilloscope to measure voltage for inspection, be sure not to forcibly extend any connector terminals.