System Control Condition Display

Quickly push (less than 1.5 seconds) and release the MAIN switch ON.

The MAIN switch indicator (cruise indicator), set distance indicator, own vehicle indicator, and set vehicle speed indicator come on and ICC system is set to a standby state.

SYSTEM CONTROL CONDITION DISPLAY TABLE

Condition			Display on ICC system display
Standby mode			Courtesy of NISSAN MOTOR CO., U.S.A.
Control mode	Without a vehicle ahead	Set vehicle distance (Long)	Courtesy of NISSAN MOTOR CO., U.S.A.
		Set vehicle distance (Middle)	Courtesy of NISSAN MOTOR CO., U.S.A.
		Set vehicle distance (Short)	Courtesy of NISSAN MOTOR CO., U.S.A.
		When the vehicle speed exceeds the set speed	Courtesy of NISSAN MOTOR CO., U.S.A.
Control mode	With a vehicle ahead	Set vehicle distance (Long)	Courtesy of NISSAN MOTOR CO., U.S.A.
		Set vehicle distance (Middle)	Courtesy of NISSAN MOTOR CO., U.S.A.
		Set vehicle distance (Short)	Courtesy of NISSAN MOTOR CO., U.S.A.
		When the vehicle speed exceeds the set speed	Courtesy of NISSAN MOTOR CO., U.S.A.

NOTE: The display of the DCA system is given priority when the DCA system is ON in a standby mode. (The set vehicle speed indicator, set distance indicator, and own vehicle indicator are not displayed). Refer to SYSTEM DESCRIPTION .