| AV CONTROL UNIT |
- Integrates hard disk drive (HDD) allowing map data and music data to be stored.
- It is the master unit of the MULTI AV system, and is connected to each control unit by communication. It operates each system according to communication signals from AV control unit.
- AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions.
- It is connected to ECM, unified meter and A/C amp. via CAN communication to obtain necessary information for the vehicle information function.
- It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function.
- It inputs the illumination signals that are required for the display dimming control.
- It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake).
- Update of map data is performed with the CONSULT-III and the applicable cable.
|
| FRONT DISPLAY UNIT |
- Front display image is controlled by the serial communication from AV control unit.
- RGB image signal is input from AV control unit (RGB, RGB area and RGB synchronizing).
- Composite image signal (DVD and auxiliary images) is input from the video distributor.
- Camera image signal input to around view monitor control unit.
- Synchronize signal (HP, VP) is output to AV control unit.
- Touch panel function can be operated for each system by touching a display directly.
|
| REAR DISPLAY UNIT |
- Rear display image is controlled by the serial communication from video distributor.
- RGB image signal is input from video distributor (RGB image and RGB area).
- Composite image signal (DVD and auxiliary images) is input from the video distributor.
- Synchronize signal (HP, VP) is output to video distributor.
- It receives the DVD/AUX sound signal from the DVD player, and then transmits it to the headphones.
- It operates by receiving the headphone ON signal from the video distributor.
|
| VIDEO DISTRIBUTOR |
- It receives the image signal from the DVD player, and auxiliary input jack, and then transmits it to the front display unit and rear display unit.
- It transmits headphone ON signal to rear display unit.
|
| DVD PLAYER |
- It transmits the playback DVD image signal to the video distributor. It also transmits the input AUX sound signal to the AV control unit.
|
| BOSE AMP. |
- Inputs power (amp. ON) and sound signal from AV control unit, and outputs sound signal to woofer and each speaker.
- Input "Driver's Audio Stage" mode change signal from AV control unit.
- Woofer amp. ON signal is transmitted to woofer.
|
| FRONT DOOR SPEAKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (mid and low range).
|
| REAR DOOR SPEAKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (mid and low range).
|
| FRONT SQUAWKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (high and mid range).
|
| REAR SQUAWKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (high and mid range).
|
| CENTER SPEAKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (high and mid range).
|
| WOOFER |
- Inputs power (amp. ON) and sound signal from BOSE amp.
- Outputs low-frequency sound.
|
| MULTIFUNCTION SWITCH |
- Operation panel is equipped with the centralized switch where audio, auxiliary input and navigation operations are integrated.
- Connected with preset switch via cable, and operation signal is transmitted to AV control unit via AV communication.
|
| PRESET SWITCH |
- Operation panel is equipped with the centralized switch where audio and air conditioner operations are integrated.
- Connected with multifunction switch via cable, and operation signal is transmitted to AV control unit via AV communication.
- The disk ejection operating signal is performed by hardwire.
|
| AROUND VIEW MONITOR CONTROL UNIT |
- It supplies power to front camera, rear camera, and side camera. And then it superimposes the images from each camera and outputs them to front display unit.
- Superimpose the guiding line, predicted course line and sonar indicator to the camera image that outputs to front display unit.
- It performs the reception/transmission of communication signal with each camera.
- Inputs the sensor signal from steering angle sensor, and then controls the predicted course line.
- It transmits the sonar operation signal from sonar control unit and receives the sonar information from sonar control unit via AV communication.
- It transmits the information received/transmitted with sonar control unit via AV communication to AV control unit.
|
| FRONT CAMERA |
- It inputs the power supply from around view monitor control unit and outputs the image of the vehicle front to around view monitor control unit.
- It performs the reception/transmission of the communication signal with around view monitor control unit.
|
| REAR CAMERA |
- It inputs the power supply from around view monitor control unit and outputs the image of the vehicle rear to around view monitor control unit.
- It performs the reception/transmission of the communication signal with around view monitor control unit.
|
| SIDE CAMERA LH |
- It inputs the power supply from around view monitor control unit and outputs the image of the vehicle LH to around view monitor control unit.
- It performs the reception/transmission of the communication signal with around view monitor control unit.
|
| SIDE CAMERA RH |
- It inputs the power supply from around view monitor control unit and outputs the image of the vehicle RH to around view monitor control unit.
- It performs the reception/transmission of the communication signal with around view monitor control unit.
|
| INFRARED LED (AUXILIARY LIGHTING) |
- It illuminates around the front RH wheel by the power supply from around view monitor control unit to improve nighttime visibility of Front-Side view.
- The infrared LED is an invisible light ray.
|
| STEERING SWITCH |
- Operations for audio, hands-free phone, audio response and navigation, etc. are possible.
- Steering switch signal (operation signal) is output to AV control unit.
|
| STEERING ANGLE SENSOR |
Steering signal necessary for predicted course line control is transmitted to camera control unit or around view monitor control unit. |
| MICROPHONE |
- Used for hands-free phone operation and voice recognition.
- Mic signal is transmitted to AV control unit.
- Power (Mic VCC) is supplied from AV control unit.
|
| AUXILIARY INPUT JACKS |
Image signal of auxiliary input is output to video distributor, and sound signal is output to DVD player. |
| GPS ANTENNA |
GPS signal is received and transmitted to AV control unit. |
| ANTENNA BASE |
A radio antenna base integrated with radio antenna amp. and satellite radio antenna is adopted.
ANTENNA AMP.
- Radio signal received by rod antenna is amplified and transmitted to AV control unit.
- Power (antenna amp. ON signal) is supplied from AV control unit. SATELLITE RADIO ANTENNA
- Receives satellite radio waves and outputs it to AV control unit.
|
| iPod ADAPTER |
- Inputs iPod sound signal from iPod®, and outputs iPod sound signal to AV control unit.
- Receiving/transmitting of iPod® operation signals are performed as follows:
- between AV control unit and iPod adapter: AV communication.
- between iPod® and iPod adapter: serial communication.
|
| SONAR CONTROL UNIT |
- It is connected with around view monitor control unit via AV communication and receives the sonar operation signal from around view monitor control unit.
- It transmits the sonar detection status to around view monitor control unit via AV communication.
- It judges the warning level according to the signal from corner sensor and outputs the buzzer drive signal.
- Trouble diagnosis is supported with CONSULT-III (K-LINE).
|
| CORNER SENSOR |
The obstacle distance is detected. The signal is transmitted to sonar control unit. |
| BUZZER |
The warning buzzer outputs with the signal from sonar control unit. |