LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> FX35 AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Audio, Visual, Navigation System (Without Navigation) >> Component Diagnosis >> RGB Synchronizing Signal Circuit >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

  1. CHECK CONTINUITY RGB SYNCHRONIZING SIGNAL CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect front display unit connector and AV control unit connector.
    3. Check continuity between front display unit harness connector and AV control unit harness connector.
      CONTINUITY TABLE

      Front display unit AV control unit Continuity
      Connector Terminal Connector Terminal
      M71 19 M83 41 Existed
    4. Check continuity between front display unit harness connector and ground.
      CONTINUITY TABLE

      Front display unit Ground Continuity
      Connector Terminal
      M71 19 Not existed

      Is the inspection result normal? 

      YES: GO TO  2.

      NO: Repair harness or connector.

  2. CHECK RGB SYNCHRONIZING SIGNAL 
    1. Connect front display unit connector and AV control unit connector.
    2. Turn ignition switch ON.
    3. Check signal between front display unit harness connector and ground.
      CONNECTOR TERMINAL REFERENCE VALUE TABLE

      (+) (-) Reference value
      Front display unit
      Connector Terminal
      M71 19 Ground
      G05976551Courtesy of NISSAN MOTOR CO., U.S.A.

      Is the inspection result normal? 

      YES: Replace front display unit.

      NO: Replace AV control unit.