Physical Values

TERMINAL REFERENCE TABLE

Terminal (Wire color)		Description		Condition		Reference value (Approx.)
+	-	Signal name	Input/Output	Condition		Reference value (Approx.)
1 (Y)	Ground	Battery power supply	Input	Ignition switch OFF	-	Battery voltage
2 (LG)	Ground	ACC power supply	Input	Ignition switch ACC	-	Battery voltage
3 (W)	Ground	Ignition signal	Input	Ignition switch ON	-	Battery voltage
4 (B)	Ground	Ground	-	Ignition switch ON	-	0 V
7 (L)	8	Microphone signal	Input	Ignition switch ON	Give a voice	Courtesy of NISSAN MOTOR CO., U.S.A.
8	Ground	Microphone ground	-	Ignition switch ON	-	0 V
9 (L)	10 (P)	TEL voice signal	Output	Ignition switch ON	During voice guide output with the switch pressed.	Courtesy of NISSAN MOTOR CO., U.S.A.
20 (B)	Ground	Control signal	-	Ignition switch ON	-	0 V
23 (B)	Ground	Control signal	-	Ignition switch ON	-	0 V
24 (B)	Ground	Control signal	-	Ignition switch ON	-	0 V
28 (P)	Ground	Vehicle speed signal (8-pulse)	Input	Ignition switch ON	When vehicle speed is approx. 40 km/h (25 MPH)	NOTE: The maximum voltage varies depending on the specification (destination unit). Courtesy of NISSAN MOTOR CO., U.S.A.
29 (P)	8	Microphone VCC	Output	Ignition switch ON	-	5.0 V
33	-	TEL antenna	Input	-	-	-
34	-	Shield	-	-	-	-
35 (L)	-	AV communication signal (H)	Input/Output	-	-	-
36 (P)	-	AV communication signal (L)	Input/Output	-	-	-