| AV CONTROL UNIT |
- It is the master unit of the MULTI AV system, and is connected to each control unit by communication. It operates each system according to communication signals from AV control unit.
- AV control unit includes the audio and vehicle information functions.
- It is connected to ECM, unified meter and A/C amp. via CAN communication to obtain necessary information for the vehicle information function.
- It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function.
- It inputs the illumination signals that are required for the display dimming control.
- It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake).
- Auxiliary image signal is input from the auxiliary input jacks.
- Camera image signal is input from camera control unit.
|
| FRONT DISPLAY UNIT |
- Front display image is controlled by the serial communication from AV control unit.
- RGB image signal is input from AV control unit (RGB, RGB area and RGB synchronizing). Camera image signal is input from AV control unit.
- Composite image signal (auxiliary images) is input from the AV control unit.
- Synchronize signal (HP, VP) is output to AV control unit.
|
| BOSE AMP. |
- Inputs power (amp. ON) and sound signal from AV control unit, and outputs sound signal to woofer and each speaker.
- Input "Driver's Audio Stage" mode change signal from AV control unit.
- Woofer amp. ON signal is transmitted to woofer.
|
| FRONT DOOR SPEAKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (mid and low range).
|
| REAR DOOR SPEAKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (mid and low range).
|
| FRONT SQUAWKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (high and mid range).
|
| REAR SQUAWKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (high and mid range).
|
| CENTER SPEAKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (high and mid range).
|
| WOOFER |
- Inputs power (woofer amp. ON) and sound signal from BOSE amp.
- Outputs low-frequency sound.
|
| MULTIFUNCTION SWITCH |
- Operation panel is equipped with the centralized switch where audio and auxiliary input operations are integrated.
- Connected with preset switch via cable, and operation signal is transmitted to AV control unit via AV communication.
|
| PRESET SWITCH |
- Operation panel is equipped with the centralized switch where audio and air conditioner operations are integrated.
- Connected with multifunction switch via cable, and operation signal is transmitted to AV control unit via AV communication.
- The disk ejection operating signal is performed by hardwire.
|
| CAMERA CONTROL UNIT |
- Camera image signal is input from rear view camera. Camera image signal is output to AV control unit.
- Power (camera ON signal) is transmitted to rear view camera.
- Superimposes the guiding line and predicted course line to the camera image that outputs to AV control unit.
- Camera control unit is connected via AV communication.
|
| REAR VIEW CAMERA |
- The image from rear camera is transmitted to camera control unit.
- It receives power (camera ON signal) from camera control unit and operates.
|
| STEERING SWITCH |
- Operations such as audio and hands-free phone are possible.
- Steering switch signal (operation signal) is output to AV control unit.
|
| STEERING ANGLE SENSOR |
It is connected to the AV control unit and transmits the steering angle signal via CAN communication. |
| AUXILIARY INPUT JACKS |
Auxiliary input jacks Image and sound signal are transmitted to AV control unit. |
| ANTENNA BASE |
A radio antenna base integrated with radio antenna amp. and satellite radio antenna is adopted.
ANTENNA AMP.
- Radio signal received by rod antenna is amplified and transmitted to AV control unit.
- Power (antenna amp. ON signal) is supplied from AV control unit.
SATELLITE RADIO ANTENNA
- Receives satellite radio waves and outputs it to satellite radio tuner.
|
| iPod ADAPTER |
- Inputs iPod sound signal from iPod®, and outputs iPod sound signal to AV control unit.
- Receiving/transmitting of iPod® operation signals are performed as follows:
- between AV control unit and iPod adapter: AV communication.
- between iPod® and iPod adapter: serial communication.
|
| TEL ADAPTER UNIT |
- Inputs the TEL voice signal from TEL antenna and outputs it to AV control unit.
- It is connected with AV control unit via AV communication and controlled with AV control unit.
|
| TEL ANTENNA |
Receives the TEL voice signal and outputs it to TEL adapter unit. |
| MICROPHONE |
- Used only when hands-free phone is operated.
- Outputs Mic. signal (TEL voice signal) to TEL adapter unit.
- The power (Mic. power supply) is supplied from TEL adapter unit.
|
| SATELLITE RADIO TUNER |
- Inputs the satellite radio signal from satellite radio antenna and outputs the sound signal to AV control unit.
- It is controlled with AV control unit and serial communication (communication signal and request signal).
|