Diagnosis Procedure
- CHECK CONTINUITY HORIZONTAL SYNCHRONIZING (HP) SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect front display unit connector and AV control unit connector.
- Check continuity between front display unit harness connector and AV control unit harness connector.TERMINAL CONTINUITY REFERENCE TABLE
Front display unit AV control unit Continuity Connector Terminal Connector Terminal M75 8 M88 68 Existed - Check continuity between front display unit harness connector and ground.TERMINAL CONTINUITY REFERENCE TABLE
Front display unit Ground Continuity Connector Terminal M75 8 Not existed Is inspection result normal?
YES: GO TO 2.
NO: Repair harness or connector.
- CHECK HORIZONTAL SYNCHRONIZING (HP) SIGNAL
- Connect front display unit connector and AV control unit connector.
- Turn ignition switch ON.
- Check signal between front display unit harness connector and ground.TERMINAL CONNECTOR REFERENCE TABLE
(+) (-) Reference value Front display unit Connector Terminal M75 8 Ground Is inspection result normal?
YES: Replace AV control unit.
NO: Replace front display unit.