LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> FX35 AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Audio, Visual, Navigation System (With Navigation - Twin Monitor) >> Component Diagnosis >> Vertical Synchronizing Signal Circuit (Front Display Unit To Av Control Unit) >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

  1. CHECK CONTINUITY VERTICAL SYNCHRONIZING (VP) SIGNAL CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect front display unit connector and AV control unit connector.
    3. Check continuity between front display unit harness connector and AV control unit harness connector.
      TERMINAL CONTINUITY REFERENCE TABLE

      Front display unit AV control unit Continuity
      Connector Terminal Connector Terminal
      M75 20 M88 69 Existed
    4. Check continuity between front display unit harness connector and ground.
      TERMINAL CONTINUITY REFERENCE TABLE

      Front display unit Ground Continuity
      Connector Terminal
      M75 20 Not existed

      Is inspection result normal? 

      YES: GO TO  2.

      NO: Repair harness or connector.

  2. CHECK VERTICAL SYNCHRONIZING (VP) SIGNAL 
    1. Connect front display unit connector and AV control unit connector.
    2. Turn ignition switch ON.
    3. Check signal between front display unit harness connector and ground.
      TERMINAL CONNECTOR REFERENCE TABLE

      (+) (-) Reference value
      Front display unit
      Connector Terminal
      M75 20 Ground
      G04923331Courtesy of NISSAN MOTOR CO., U.S.A.

      Is inspection result normal? 

      YES: Replace AV control unit.

      NO: Replace front display unit.

scientia non olet · About LEMON Manuals