Diagnosis Procedure
- CHECK CONTINUITY HORIZONTAL SYNCHRONIZING (HP) SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect front display unit connector and AV control unit connector.
- Check continuity between front display unit harness connector and AV control unit harness connector.CONTINUITY TABLE
Front display unit AV control unit Continuity Connector Terminal Connector Terminal M71 8 M83 45 Existed - Check continuity between front display unit harness connector and ground.CONTINUITY TABLE
Front display unit Ground Continuity Connector Terminal M71 8 Not existed Is the inspection result normal?
YES: GO TO 2.
NO: Repair harness or connector.
- CHECK HORIZONTAL SYNCHRONIZING (HP) SIGNAL
- Connect front display unit connector and AV control unit connector.
- Turn ignition switch ON.
- Check signal between front display unit harness connector and ground.CONNECTOR TERMINAL REFERENCE VALUE TABLE
(+) (-) Reference value Front display unit Connector Terminal M71 8 Ground Is the inspection result normal?
YES: Replace AV control unit.
NO: Replace front display unit.