System Setting Procedure

Setting of welcome light function can be changed by the following procedure. (For system setting by CONSULT-III: refer to INTELLIGENT KEY: CONSULT-III FUNCTION - BCM - INTELLIGENT KEY) .

1. Check that Intelligent Key is removed from key slot.
2. Turn ignition switch ON and press and hold request switch (driver side) more than 5 seconds.
3. Confirm that buzzer sounds (combination meter).

   Pi, Pi, Pi... (approx. 1.2 seconds): Welcome light function is OFF. 

   Pi, Pi, Pi...(approx. 2.4 seconds): Welcome light function is ON.