LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> FX35 AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (VQ35HR) - Component & System Tests, Ecu & Symptom Diagnosis, Precaution & Preparation, On-Vehicle Maintenance & Repair, Service Data And Specifications (SDS) >> ASCD Brake Switch >> Component Inspection (ASCD Brake Switch)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection (ASCD Brake Switch)

  1. CHECK ASCD BRAKE SWITCH-I 
    1. Turn ignition switch OFF.
    2. Disconnect ASCD brake switch harness connector.
    3. Check the continuity between ASCD brake switch terminals under the following conditions.
      CONTINUITY CONDITIONS

      Terminals Condition Continuity
      1 and 2 Brake pedal Fully released Existed
      Slightly depressed Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: GO TO  2.

  2. CHECK ASCD BRAKE SWITCH-II 
    1. Adjust ASCD brake switch installation. Refer to INSPECTION AND ADJUSTMENT .
    2. Check the continuity between ASCD brake switch terminals under the following conditions.
      CONTINUITY CONDITIONS

      Terminals Condition Continuity
      1 and 2 Brake pedal Fully released Existed
      Slightly depressed Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace ASCD brake switch.

scientia non olet · About LEMON Manuals