DTC Detection Logic
NOTE:
- If DTC B260F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to BCM: DTC LOGIC .
- If DTC B260F is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to BCM: DTC LOGIC .
DTC DETECTION LOGIC TABLE
| DTC No. | Trouble diagnosis name | DTC detecting condition | Possible cause |
|---|---|---|---|
| B260F | ENG STATE SIG LOST | BCM has not yet received the engine status signal from ECM when ignition switch is in the ON position | ECM |