DTC Detection Logic

NOTE:

If DTC B261A is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to BCM: DTC LOGIC .
If DTC B261A is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to BCM: DTC LOGIC .

DTC DETECTION LOGIC TABLE

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B261A	PUSH-BTN IGNI SW	BCM detects the difference between the following for 1 second or more Power supply position with push-button ignition switch Power supply position from IPDM E/R (CAN)	Harness or connectors (Push-button ignition switch circuit is open or shorted) Between BCM and push-button ignition switch Between IPDM E/R and push-button ignition switch IPDM E/R BCM