Diagnosis Procedure
- PERFORM INITIALIZATION PROCEDURE
Initialization procedure is executed and operation is confirmed.
Refer to ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL: SPECIAL REPAIR REQUIREMENT .
Is the inspection result normal?
YES: INSPECTION END
NO: GO TO 2.
- CHECK DRIVER SIDE DOOR LOCK ASSEMBLY (KEY CYLINDER SWITCH)
Check driver side door lock assembly (key cylinder switch).
Refer to COMPONENT FUNCTION CHECK .
Is the inspection result normal?
YES: GO TO 3.
NO: Repair or replace the malfunctioning parts.
- CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES: Check intermittent incident. Refer to INTERMITTENT INCIDENT .
NO: GO TO 1.