Component Function Check

INSPECTION START
Turn ignition switch to START.

Are any cylinders ignited?

YES: GO TO 2.

NO: Go to DIAGNOSIS PROCEDURE .
CHECK FUEL INJECTOR FUNCTION
With CONSULT-III
1. Start engine.
2. Perform "POWER BALANCE" in "ACTIVE TEST" mode with CONSULT-III.
3. Check that each circuit produces a momentary engine speed drop.
Without CONSULT-III
1. Start engine.
2. Listen to each fuel injector operating sound.
  Clicking sound should be heard.
  
  Is the inspection result normal?
  
  YES: INSPECTION END
  
  NO: Go to DIAGNOSIS PROCEDURE .
  
  Fig 1: Checking Fuel Injector Operating Sound
  Courtesy of NISSAN MOTOR CO., U.S.A.