Component Inspection

1. Turn the ignition switch OFF.
2. Disconnect mode select switch (E-SUS mode select) harness connector.
3. Check the continuity between mode select switch (E-SUS mode select) connector terminals.
   CONTINUITY REFERENCE
   
   

   Mode select switch (E-SUS mode select)	Condition	Continuity
   Terminal
   1 - 3	When mode select switch (E-SUS mode select): SPORT	Existed
   	When mode select switch (E-SUS mode select): AUTO	Not existed

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace mode select switch (E-SUS mode select).