DTC Detection Logic
DTC DETECTION LOGIC TABLE
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| P1553 |
Battery current sensor performance |
The signal voltage transmitted from the sensor to ECM is higher than the amount of the maximum power generation. |
- Harness or connectors (Battery current sensor circuit is open or shorted.)
(Accelerator pedal position sensor 2 circuit is shorted.)
[Camshaft position sensor (bank 1) circuit is shorted.]
(Crankshaft position sensor circuit is shorted.)
(EVAP control system pressure sensor circuit is shorted.)
[Exhaust valve timing control position sensor (bank 1) circuit is shorted.]
(Manifold pressure sensor circuit is shorted.)
- Battery current sensor
- Accelerator pedal position sensor
- Camshaft position sensor (bank 1)
- Crankshaft position sensor
- EVAP control system pressure sensor
- Exhaust valve timing control position sensor (bank 1)
- Manifold pressure sensor
|