CONSULT-III Function: Function
DIAGNOSTIC TEST MODE FUNCTION TABLE
| Diagnostic test mode |
Function |
| ECU Identification |
ECM part number can be read. |
| Self Diagnostic Result |
Self-diagnostic results such as 1st trip DTC, DTC and 1st trip freeze frame data or freeze frame data can be read and erased quickly. |
| Data Monitor |
Input/Output data in the ECM can be read. |
| Active Test |
Diagnostic Test Mode in which CONSULT-III drives some actuators apart from the ECM and also shifts some parameters in a specified range. |
| Function Test |
This mode is used to inform customers when the vehicle conditions require periodic maintenance. |
| Work Support |
This mode enables a technician to adjust some devices faster and more accurately by following the indications on the CONSULT-III screen. |
| DTC & SRT Confirmation |
The status of system monitoring tests and the self-diagnosis status/results can be confirmed. |