System Description: Description
- The Continuous Damping Control system mainly consists of the components such as the E-SUS control unit, front body vertical G sensor, front wheel vertical G sensor, rear body vertical G sensor, and shock absorber actuators on each wheel.
- It calculates the command values to be transmitted to the shock absorber actuator on each wheel based on the information from ECM, ABS actuator and electric unit (control unit) and steering angle sensor via CAN communication and information from the front body vertical G sensor, front wheel vertical G sensor and rear body vertical G sensor.
- The shock absorber actuator on each wheel controls the damping force based on the command values calculated by E-SUS control unit.
- Can perform the self-diagnosis with CONSULT-III.
- Communicates the signal from each control unit via CAN communication.
CONTROL UNIT SIGNAL STATUS
| Control unit | Signal status |
|---|---|
| Steering angle sensor | Transmits mainly the following signals to E-SUS control unit via CAN communication.
|
| ABS actuator and electric unit (control unit) | Transmits mainly the following signals to E-SUS control unit via CAN communication.
|
| ECM | Transmits mainly the following signals to E-SUS control unit via CAN communication.
|
| Unified meter and A/C amp. | Transmits mainly the following signals from E-SUS control unit via CAN communication.
|