Component Description
COMPONENT DESCRIPTION TABLE
| Name | Function |
|---|---|
| TCM | The TCM consists of a microcomputer and connectors for signal input and output and for power supply. The TCM controls the A/T. |
| PNP switch | DESCRIPTION |
| Revolution sensor | DESCRIPTION |
| Turbine revolution sensor 1 | DESCRIPTION |
| Turbine revolution sensor 2 | |
| A/T fluid temperature sensor | DESCRIPTION |
| Input clutch solenoid valve | DESCRIPTION |
| Front brake solenoid valve | DESCRIPTION |
| Direct clutch solenoid valve | DESCRIPTION |
| High and low reverse clutch solenoid valve | DESCRIPTION |
| Low brake solenoid valve | DESCRIPTION |
| Anti-interlock solenoid valve | DESCRIPTION |
| 2346 brake solenoid valve | DESCRIPTION |
| Line pressure solenoid valve | DESCRIPTION |
| Torque converter clutch solenoid valve | DESCRIPTION |
| Accelerator pedal position sensor | DESCRIPTION |
| Throttle position sensor | |
| Manual mode switch | DESCRIPTION |
| Paddle shifter | DESCRIPTION |
| Starter relay | DESCRIPTION |
| A/T CHECK indicator lamp | When the ignition switch is pushed to the ON position, the light comes on for 2 seconds. |
| Stop lamp switch | DESCRIPTION |
| ECM | SYSTEM DESCRIPTION |
| BCM | SYSTEM DESCRIPTION |
| Unified meter and A/C amp. | METER SYSTEM: SYSTEM DESCRIPTION |
| ABS actuator and electric unit (control unit) | SYSTEM DESCRIPTION |
| Wheel sensor | DESCRIPTION |
| Yaw rate/side G sensor | DESCRIPTION |