Active Test Mode
WARNING: This page is about a different car, the 2010 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Do not perform active test while driving vehicle.
- Make sure to completely bleed air from brake system.
- The active test cannot be performed with the ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp or brake warning lamp on.
- ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp and brake warning lamp are on during active test.
NOTE:
- When active test is performed while depressing the pedal, the pedal depression amount will change. This is normal. (Only solenoid valve and ABS motor.)
- "TEST IS STOPPED" is displayed 10 seconds after operation start.
- After "TEST IS STOPPED" is displayed, to perform test again, touch BACK.
Test Item
SOLENOID VALVE
- When performing an active test of the ABS function, select the "MAIN SIGNALS" for each test item. In addition, when performing an active test of the VDC/TCS function, select the item menu for each test item.
- For ABS solenoid valve, touch "Up", "Keep", and "Down" on the display screen. For ABS solenoid valve (ACT), touch "Up", "ACT UP", "ACT KEEP" and confirm that solenoid valves operate as shown in the table below.SOLENOID VALVE REFERENCE CHART
Operation ABS solenoid valve ABS solenoid valve (ACT) Up Keep Down Up ACT UP ACT KEEP FR RH SOL FR RH IN SOL Off On On - - - FR RH OUT SOL Off Off On(1) - - - FR LH SOL FR LH IN SOL Off On On - - - FR LH OUT SOL Off Off On(1) - - - RR RH SOL RR RH IN SOL Off On On - - - RR RH OUT SOL Off Off On(1) - - - RR LH SOL RR LH IN SOL Off On On - - - RR LH OUT SOL Off Off On(1) - - - FR RH ABS SOLENOID (ACT) FR RH IN SOL - - - Off Off Off FR RH OUT SOL - - - Off Off Off FR LH ABS SOLENOID (ACT) FR LH IN SOL - - - Off Off Off FR LH OUT SOL - - - Off Off Off RR RH ABS SOLENOID (ACT) RR RH IN SOL - - - Off Off Off RR RH OUT SOL - - - Off Off Off RR LH ABS SOLENOID (ACT) RR LH IN SOL - - - Off Off Off RR LH OUT SOL - - - Off Off Off (1) On for 1 to 2 seconds after the touch, and then Off
ABS MOTOR