LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Power Control System) >> Removal And Installation >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Removal and Installation of IPDM E/R >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation of IPDM E/R: Removal

WARNING: This page is about a different car, the 2010 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal.
  2. Remove the IPDM E/R upper cover.
    Fig 1: Identifying IPDM E/R Upper Cover
    G04896821Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Release two clips and pull the IPDM E/R up from case.
  4. Disconnect the IPDM E/R connectors and remove the IPDM E/R.
    Fig 2: Locating IPDM E/R Connectors
    G04904363Courtesy of NISSAN MOTOR CO., U.S.A.