Configuration : Special Repair Requirement
WARNING: This page is about a different car, the 2011 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- WRITING VEHICLE SPECIFICATION
Perform "WRITE CONFIGURATION" with CONSULT-III.
When writing saved data: GO TO 2
When writing manually: GO TO 3
- PERFORM "WRITE CONFIGURATION - CONFIG FILE"
Perform "WRITE CONFIGURATION - Config file" with CONSULT-III.
Work End.
- PERFORM "WRITE CONFIGURATION - MANUAL SELECTION"
For "WRITE CONFIGURATION - Manual selection", using the following flow chart, identify the correct model and configuration list.
Confirm and/or change setting value for each item according to the configuration list.
Depending on CONSULT-III software version being used, some or all of the write configuration items shown in the following configuration lists may be displayed. If an item does not display on the CONSULT-III "WRITE CONFIGURATION - Manual selection" screen, then it is an auto setting item and it cannot be manually set or changed.
MANUAL SETTING ITEMMANUAL SETTING ITEM Items Setting value KEYLESS ENTRY WITH<=>WITHOUT I-KEY WITH<=>WITHOUT DTRL WITH<=>WITHOUT AUTO DOOR UNLOCK TIMING WITH I-KEY<=>W/O I-KEY NOTE: Confirm vehicle model. Refer to "MODEL VARIATION ".Work End.